Impression Obsession “Happy Colors” Challenge

Welcome to the Impression Obsession ” Happy Colors”  design team challenge.  Our Challenge was to play with colors that make us happy and I chose to use purple, green and white, one of my favorite color combinations.  My die cut butterfly flourish project was made using the background layer from the Bunny Frame set , All-in-One Frames Rectangles 2, Ribbon Butterfly , Tiny Five Petals and Leaves and Stems.

Come see how I made this die cut butterfly flourish embellished with flowers.

The Frame Layers

I attached the scalloped rectangle frame to the white layer using thin strips of mounting tape.  I applied strips of mounting tape to the back of the white layer and attached it to the card base.

Come see how I made this die cut butterfly flourish embellished with flowers and foliage.

The Die Cut Butterfly Flourish and Flowers

The butterfly flourish was attached to the card base using rolled up strips of double stick tape.  The stems and flowers were attached to the butterfly using glossy accents.

Come see how I made this framed die cut butterfly flourish embellished with flowers and foliage.

Thanks for coming by today. Go by the Impression Obsession blog to check out challenge details and play along with the team. I hope you have been inspired t make your own Die cut Butterfly Flourish card.

Anna Wight

Daniela Dobson

Dina Kowal

Giovana Smith

Ilina Crouse

Jeanne Streiff

Karen Amidon

Kelli Hull

Kittie Caracciolo

Laura Fulcher

Vicki Garrett

 
Impression Obsession Rubber Stamps…
[ IST ]
Impression Obsession Rubber Stamps…
[ IST ]
Impression Obsession Rubber Stamps…
[ IST ]
Leaves & Stems
[ IST ]
Impression Obsession Rubber Stamps…
[ IST ]
Neenah Cardstock, Neenah Heavyweight,…
[ ELH ]
Bazzill Card Shoppe Cardstock, Sour…
[ ELH ]
Bazzill Card Shoppe Cardstock, Easter…
[ ELH ]
My Sweet Petunia MISTI Laser Etched…
[ ELH ]
My Sweet Petunia Mini MISTI Laser…
[ ELH ]
Be Creative Tape, 7mm (3/10″)
[ ELH ]
Be Creative Tape, 15mm (3/5″)
[ ELH ]
Be Creative Tape, 25mm (1″)
[ ELH ]
Be Creative Tape, 5mm (1/4″)
[ ELH ]
Be Creative Tape, 3mm (1/8″)
[ ELH ]
EK Tools, Precision 5 Inch Scissors…
[ ELH ]
PanPastel Sofft Mini Applicators, 12 pk
[ ELH ]
Ranger Non-Stick Craft Sheet
[ ELH ]
Glue Dots, 3/8″ (4029)
[ ELH ]
Glue Dots, Mini (3/16″)
[ ELH ]
Glue Dots, Micro (1/8″)
[ ELH ]
Scotch Foam Mounting Tape
[ ELH ]
ATG Double-Sided Refill Tape, 2 pk, 1/4″
[ ELH ]
ATG Kit, Advanced Tape Glider
[ ELH ]
Ranger Accents, Mini Glossy Accents
[ ELH ]
Ranger Accents, Glossy Accents
[ ELH ]
Creative Expressions Cosmic Shimmer…
[ ELH ]
Crafter’s Pick The Ultimate Glue, 4 oz.
[ ELH ]
Hero Arts Embossing Gun (Wagner)
[ ELH ]
Tonic Maxi 12 Inch Guillotine Paper…
[ ELH ]
Teflon Bone Folder
[ ELH ]
Tonic Comfort 8.5 Inch Guillotine…
[ ELH ]
Scor-Pal Measuring & Scoring Board 12×12
[ ELH ]
Scor-Pal Glitter Clean-Up Cloth
[ ELH ]
Memory Box Dies, Metal Adaptor Plate
[ ELH ]
Sizzix Accessory – Standard Magnetic…
[ SZZ | SBC ]
Sizzix Accessory – Precision Base…
[ SZZ | SBC ]
Sizzix Big Shot White & Gray
[ ELH | SZZ | SBC ]
Dremel 7700-1/15 MultiPro 7.2-Volt…
[ AMZUS ]
 

Scalloped Frame with Butterfly and Flowers and Holiday Sales

Good Tuesday morning.  I have an elegant scalloped frame with butterfly and flowers card to share with you today made using Rubbernecker Stamps and dies and sentiment.  The frame was made using 5119D Nested Circle Scallop with Holes and 5029D Nested Circle Scallop.   The double layered butterfly with flowers was made using 3020D Butterflies are Free, 5147-05D Flower Stems, 5147-09D Flower Buds.  The sentiment is 627-02 Gentle as a Butterfly.  The sentiment and dies are all on 15% off at Rubbernecker’s July 4th holiday sale.

Come see how I made this pretty scalloped frame with butterfly and flowers card.

The Frame and Sentiment

I secured the stamp and cardstock in my MISTI, applied versa and stamped the sentiment.  The clear versa is a little hard to see on white cardstock so I applied more versa to the stamp, stamped it a second time just to make sure I had good ink coverage and then sprinkled with gold embossing powder and heated with my heat gun.

I cut the large white scalloped layer, centering the smaller scalloped die in place and then cutting to create the frame.  I cut a yellow scalloped frame and attached it to the back of the white frame using strips of mounting tape. I applied double stick tape to the back of the frame, attached to the frame and then attached the whole framed sentiment to the yellow card base using double stick tape.  I like adding dimension to my projects so I attached the whole yellow layer and frame to the white card base with pieces of mounting tape. That additional layer of dimension adds lots more interest to the card than if it were attached flat to the base.

Come see how I made this pretty scalloped frame with butterfly and flowers thank you card .

Scalloped Frame with Butterfly and Flowers

I cut several pieces of stems and small white flowers and I formed the flowers using my stylus and molding pad.  I cut the butterfly in yellow and attached the stems and flowers using glossy accents.  When I went to attach the butterfly to the frame I saw that the bottom of the yellow butterfly didn’t show up well against the yellow base layer.  I cut a white butterfly and attached it to the frame and then offset the yellow butterfly and attached it over the white butterfly with glossy accents.  I attached yellow Nuvo Crystal Drops in the flower centers using glossy accents for the finishing touch. 

Come see how I made this pretty scalloped frame with butterfly and flowers card with kindness sentiment.

Rubbernecker Stamps Sale

Rubbernecker 4th sale

Ellen Hutson July 4th Holiday Sale

Ellen 4th sale

Dick Blick Sale

Get 20% Off Blick Orders of $79 or More, and Free Shipping on Orders of $35! Use Promo Code CEPD. Exclusions apply.

dickblick.com

Thanks for coming by today.  I hope you have been inspired to make your own scalloped frame with butterfly and flowers card.  I sure had fun making mine. 

 
Nested Circle Scallop w/ Holes Die…
[ RBB ]
Nested Circle Scallop Die Cut 5029D
[ RBB ]
3020D Butterflies are Free Die set
[ RBB ]
Flower Buds Die Cut 5147-09D
[ RBB ]
Flower Stems Die 5147-05D
[ RBB ]
Gentle As a Butterfly – 627-02
[ RBB ]
Kittie Kraft basics #1
[ RBB ]
Bazzill Card Shoppe Cardstock, Easter…
[ ELH ]
Bazzill Card Shoppe Cardstock, Sour…
[ ELH ]
Neenah Cardstock, Neenah Heavyweight,…
[ ELH ]
Susan’s Garden 4pcs. all metal tool set
[ ELZ | ELH ]
Large Molding Pad (6.5″ X 12″/16.5mm…
[ ELZ ]
VersaMark Ink Pad
[ ELH ]
Ranger Super Fine Embossing Powder, Gold
[ ELH ]
Tonic Nuvo Crystal Drops, Dandelion…
[ ELH ]
My Sweet Petunia MISTI Laser Etched…
[ ELH ]
My Sweet Petunia Mini MISTI Laser…
[ ELH ]
Be Creative Tape, 7mm (3/10″)
[ ELH ]
Be Creative Tape, 15mm (3/5″)
[ ELH ]
Be Creative Tape, 25mm (1″)
[ ELH ]
Be Creative Tape, 5mm (1/4″)
[ ELH ]
Be Creative Tape, 3mm (1/8″)
[ ELH ]
EK Tools, Precision 5 Inch Scissors…
[ ELH ]
Ranger Non-Stick Craft Sheet
[ ELH ]
Glue Dots, 3/8″ (4029)
[ ELH ]
Glue Dots, Mini (3/16″)
[ ELH ]
Glue Dots, Micro (1/8″)
[ ELH ]
Scotch Foam Mounting Tape
[ ELH ]
ATG Double-Sided Refill Tape, 2 pk, 1/4″
[ ELH ]
ATG Kit, Advanced Tape Glider
[ ELH ]
Ranger Accents, Mini Glossy Accents
[ ELH ]
Ranger Accents, Glossy Accents
[ ELH ]
Creative Expressions Cosmic Shimmer…
[ ELH ]
Crafter’s Pick The Ultimate Glue, 4 oz.
[ ELH ]
Hero Arts Embossing Gun (Wagner)
[ ELH ]
Tonic Maxi 12 Inch Guillotine Paper…
[ ELH ]
Teflon Bone Folder
[ ELH ]
Tonic Comfort 8.5 Inch Guillotine…
[ ELH ]
Scor-Pal Measuring & Scoring Board 12×12
[ ELH ]
Scor-Pal Glitter Clean-Up Cloth
[ ELH ]
Memory Box Dies, Metal Adaptor Plate
[ ELH ]
Sizzix Accessory – Standard Magnetic…
[ SZZ | SBC ]
Sizzix Accessory – Precision Base…
[ SZZ | SBC ]
Sizzix Big Shot White & Gray
[ ELH | SZZ | SBC ]
Dremel 7700-1/15 MultiPro 7.2-Volt…
[ AMZUS ]
 

Inspirational Quotes, Flowers and Butterflies

“Everything comes to you in the right moment.  Be Patient. Be Grateful.” Inspirational quotes, flowers and butterflies combined work together to create beautiful card fronts. I love the simplicity of sentiment framed with the addition of foliage stems and flowers.  My project today was made using the Rubbernecker 3020 Butterflies are Free, 5132D Rectangle Combo #2 OPC, 5128D Tree Panel #25114D Mini Flower Stack and 5100-08 Small Butterfly.  You can find the mini flower and small butterfly grouped together in the Kittie Kraft Basics set.

Inspirational quotes, flowers and butterflies create an encouraging focal point on a card front.

The Frame

I attached the three sections of the frame together using double stick tape.   Next I attached thin strips of mounting tape to the back of the frame and attached the tree foliage to the mounting tape.

Inspirational quotes, flowers and butterflies are an encouraging focal point on a card front.

Inspirational Quotes, Flowers and Butterflies

I stamped the sentiment on the card base using versa,  embossed with super fine gold embossing powder and then attached the frame and foliage to the card base. The tiny flowers were formed using my stylus and molding pad and attached to the foliage using glossy accents. The pre made white Nuvo Crystal Drops were attached to each flower center using glossy accents.  I attached one tiny flower and leaves to the small butterfly with glossy accents and attached it to the card base using glossy accents for the finish.  The pretty gold embossing on the sentiment did not show up well in the photos.

Inspirational quotes, flowers and butterflies are the perfect focal point on a card front.

Do you like to use inspirational quotes, flowers and butterflies on your card front?  Have you been inspired to pull out your toys and create an inspirational card?  I always like to have a few on hand when you need one to send to a family member or friend for encouragement.

 
Tree Panel #2 5128D
[ RBB ]
3020 Butterflies Are Free
[ RBB ]
Rectangle Combo #2 OPC Die 5132D
[ RBB ]
Mini Flower Stack Die 5114D
[ RBB ]
Small Butterfly Die Cut 5100-08D
[ RBB ]
Kittie Kraft basics #1
[ RBB ]
Neenah Cardstock, Neenah Heavyweight,…
[ ELH ]
Bazzill Card Shoppe Cardstock, Icy…
[ ELH ]
Bazzill Card Shoppe Cardstock, Easter…
[ ELH ]
VersaMark Ink Pad
[ ELH | MFT | SBC ]
Ranger Super Fine Embossing Powder, Gold
[ ELH ]
Susan’s Garden 4pcs. all metal tool set
[ ELZ | ELH ]
Large Molding Pad (6.5″ X 12″/16.5mm…
[ ELZ ]
Nuvo Crystal Drops – Gloss White (3734)
[ MFT | ELH ]
My Sweet Petunia MISTI Laser Etched…
[ ELH ]
My Sweet Petunia Mini MISTI Laser…
[ ELH ]
Be Creative Tape, 7mm (3/10″)
[ ELH ]
Be Creative Tape, 15mm (3/5″)
[ ELH ]
Be Creative Tape, 25mm (1″)
[ ELH ]
Be Creative Tape, 5mm (1/4″)
[ ELH ]
Be Creative Tape, 3mm (1/8″)
[ ELH ]
EK Tools, Precision 5 Inch Scissors…
[ ELH ]
Ranger Non-Stick Craft Sheet
[ ELH ]
Glue Dots, 3/8″ (4029)
[ ELH ]
Glue Dots, Mini (3/16″)
[ ELH ]
Glue Dots, Micro (1/8″)
[ ELH ]
Scotch Foam Mounting Tape
[ ELH ]
ATG Double-Sided Refill Tape, 2 pk, 1/4″
[ ELH ]
ATG Kit, Advanced Tape Glider
[ ELH ]
Ranger Accents, Mini Glossy Accents
[ ELH ]
Ranger Accents, Glossy Accents
[ ELH ]
Creative Expressions Cosmic Shimmer…
[ ELH ]
Crafter’s Pick The Ultimate Glue, 4 oz.
[ ELH ]
PanPastel Sofft Mini Applicators, 12 pk
[ ELH ]
Hero Arts Embossing Gun (Wagner)
[ ELH ]
Tonic Maxi 12 Inch Guillotine Paper…
[ ELH ]
Teflon Bone Folder
[ ELH ]
Tonic Comfort 8.5 Inch Guillotine…
[ ELH ]
Scor-Pal Measuring & Scoring Board 12×12
[ ELH ]
Scor-Pal Glitter Clean-Up Cloth
[ ELH ]
Memory Box Dies, Metal Adaptor Plate
[ ELH ]
Sizzix Accessory – Standard Magnetic…
[ SZZ | SBC ]
Sizzix Accessory – Precision Base…
[ SZZ | SBC ]
Sizzix Big Shot White & Gray
[ ELH | SZZ | SBC ]
Dremel 7700-1/15 MultiPro 7.2-Volt…
[ AMZUS ]
 

Elegant Die Cut Butterfly Wings with Flowers

I have another die cut butterfly wings with flowers project to share with you today using Rubbernecker’s 627-03 Fluttering By sentiment, 946-01B 2 Part Butterfly #1, 5110D Small Leaf Group, 5109D Mixable Flower Stack and 5131D Square Combo #1 OPC.

A card with die cut butterflfy wings and flowers is so pretty and elegant.

I began by securing the cardstock and sentiment stamp in my MISTI, applied versa, stamped the image and then heat embossed with gold embossing powder.  I attached the frame over the sentiment using strips of mounting tape.  I attached the frame layer to the card base using strips of mounting tape.

A card with die cut butterflfy wings and flowers is so pretty.

I attached both layers of butterfly to the frame base using mounting tape.  I formed the flowers using my stylus and molding pad, and attached the layers together with glossy accents. I cut several pieces of foliage, applied versa and embossed with gold embossing powder.  The flowers and foliage were attached on the butterfly using glossy accents.  I gold embossed a small piece of cardstock with gold powder, punched out 1/8″ circles and attached them in the flower centers using glossy accents.

A card with die cut butterflfy wings and flowers is so elegant.

I sure do appreciate you coming by today and I wish you a wonderful Easter weekend.  I hope you have been inspired to get out your stamps, dies and embossing powder and create your own clean and simple die cut butterfly wings with flowers project.

 

 

 
Fluttering By – 627-03
[ RBB ]
2 Part Butterfly #1 946-01B
[ RBB ]
Square Combo #1 OPC Die 5131D
[ RBB ]
Mixable Flower Stack Die 5109D
[ RBB ]
Small Leaf Group Die 5110D
[ RBB ]
Bazzill CS12-4549 Bazzill Card Shoppe…
[ AMZUS ]
Neenah Cardstock, Neenah Heavyweight,…
[ ELH ]
My Sweet Petunia MISTI Laser Etched…
[ ELH ]
My Sweet Petunia Mini MISTI Laser…
[ ELH ]
Hero Arts Embossing Gun (Wagner)
[ ELH ]
Susan’s Garden 4pcs. all metal tool set
[ ELZ | ELH ]
Large Molding Pad (6.5″ X 12″/16.5mm…
[ ELZ ]
VersaMark Ink Pad
[ ELH ]
Ranger Super Fine Embossing Powder, Gold
[ ELH ]
Be Creative Tape, 7mm (3/10″)
[ ELH ]
Be Creative Tape, 15mm (3/5″)
[ ELH ]
Be Creative Tape, 25mm (1″)
[ ELH ]
Be Creative Tape, 5mm (1/4″)
[ ELH ]
Be Creative Tape, 3mm (1/8″)
[ ELH ]
EK Tools, Precision 5 Inch Scissors…
[ ELH ]
Ranger Non-Stick Craft Sheet
[ ELH ]
Glue Dots, 3/8″ (4029)
[ ELH ]
Glue Dots, Mini (3/16″)
[ ELH ]
Glue Dots, Micro (1/8″)
[ ELH ]
Scotch Foam Mounting Tape
[ ELH ]
ATG Double-Sided Refill Tape, 2 pk, 1/4″
[ ELH ]
ATG Kit, Advanced Tape Glider
[ ELH ]
Ranger Accents, Mini Glossy Accents
[ ELH ]
Ranger Accents, Glossy Accents
[ ELH ]
Creative Expressions Cosmic Shimmer…
[ ELH ]
Crafter’s Pick The Ultimate Glue, 4 oz.
[ ELH ]
PanPastel Sofft Mini Applicators, 12 pk
[ ELH ]
Tonic Maxi 12 Inch Guillotine Paper…
[ ELH ]
Teflon Bone Folder
[ ELH ]
Tonic Comfort 8.5 Inch Guillotine…
[ ELH ]
Scor-Pal Measuring & Scoring Board 12×12
[ ELH ]
Scor-Pal Glitter Clean-Up Cloth
[ ELH ]
Memory Box Dies, Metal Adaptor Plate
[ ELH ]
Sizzix Accessory – Standard Magnetic…
[ SZZ | SBC ]
Sizzix Accessory – Precision Base…
[ SZZ | SBC ]
Sizzix Big Shot White & Gray
[ ELH | SZZ | SBC ]
Dremel 7700-1/15 MultiPro 7.2-Volt…
[ AMZUS ]
 

Pink and Black Die Cut Butterfly

I have a bright pink and black die cut butterfly card to share with you today made using the Rubbernecker 3020 Butterflies Are Free Stamp Set3020 Butterflies Are Free Stamp Set, 3020D Butterflies Are Free Die Set, 947-01B 2 Part Butterfly # 2 Die, 5019D Nested Rounded Corner Rectangle w/ Pierce Die and 5028 Nested Rectangle Scallop Die.  Are you getting tired of my butterfly cards yet?  I just can’t seem to help myself.  I love the delicate decorative butterfly layers.

A pink and black die cut butterfly is pretty on a clean and simple background.

Assembling the Pink and Black Die Cut Butterfly

The butterfly was stamped on retired Stampin’ Up! Regal Rose cardstock with black versafine ink and heat embossed using clear super fine embossing powder.  I secured the coordinating die over the stamped image using Eclipse tape and cut using my Big Shot.  I cut the larger butterfly using black cardstock and attached the two butterflies together using mounting tape.

A pink and black die cut butterfly is pretty on a white clean and simple background.

Assembling the Frame and Scalloped Layer

I used several of the dies from the nested round corner rectangle set to create the frame layers.  The black background layer was attached to the white card base using ATG adhesive.  I attached the white and pink frame layers together using mounting tape. The sentiment was stamped on a white cardstock using black versafine and I heat embossed it with clear super fine embossing powder.  I attached the sentiment layer to the back of the double matted frame using strips of mounting tape and attached it over the black layer using ATG adhesive. 

A pink and black die cut butterfly is pretty on a simple white background.

I attached the butterfly to the frame using a piece of mounting tape and finished by embellishing the butterfly body with small pre made drops  of black Nuvo Crystal Drops.

Thank you for  coming by today.  I hope you have been inspired to get out your stamps, dies and cardstock to create your own clean and simple, pink and black die cut butterfly card.

 
3020 Butterflies Are Free
[ RBB ]
3020D Butterflies are Free Die set
[ RBB ]
2 Part Butterfly #2 947-01B
[ RBB ]
Nested Rounded Corner Rectangle w/…
[ RBB ]
Nested Rectangle Scallop Die Cut 5028D
[ RBB ]
Neenah Cardstock, Neenah Heavyweight,…
[ ELH ]
Bazzill Card Shoppe Cardstock,…
[ ELH | SBC | CRT ]
VersaFine Ink Pad, Onyx Black
[ ELH ]
Tonic Nuvo Crystal Drops, Black Ebony…
[ ELH | MFT | SBC ]
Ranger Super Fine Embossing Powder,…
[ ELH | MFT | SBC ]
Judikins Eclipse Tape
[ ELH ]
Judikins Eclipse Twins
[ ELH ]
My Sweet Petunia Mini MISTI Laser…
[ ELH ]
My Sweet Petunia MISTI Laser Etched…
[ ELH ]
Be Creative Tape, 7mm (3/10″)
[ ELH ]
Be Creative Tape, 15mm (3/5″)
[ ELH ]
Be Creative Tape, 25mm (1″)
[ ELH ]
Be Creative Tape, 5mm (1/4″)
[ ELH ]
Be Creative Tape, 3mm (1/8″)
[ ELH ]
Susan’s Garden 4pcs. all metal tool set
[ ELZ | ELH ]
Large Molding Pad (6.5″ X 12″/16.5mm…
[ ELZ ]
EK Tools, Precision 5 Inch Scissors…
[ ELH ]
Ranger Non-Stick Craft Sheet
[ ELH ]
Glue Dots, 3/8″ (4029)
[ ELH ]
Glue Dots, Mini (3/16″)
[ ELH ]
Glue Dots, Micro (1/8″)
[ ELH ]
Scotch Foam Mounting Tape
[ ELH ]
ATG Double-Sided Refill Tape, 2 pk, 1/4″
[ ELH ]
ATG Kit, Advanced Tape Glider
[ ELH ]
Ranger Accents, Mini Glossy Accents
[ ELH ]
Ranger Accents, Glossy Accents
[ ELH ]
Creative Expressions Cosmic Shimmer…
[ ELH ]
Crafter’s Pick The Ultimate Glue, 4 oz.
[ ELH ]
PanPastel Sofft Mini Applicators, 12 pk
[ ELH ]
Hero Arts Embossing Gun (Wagner)
[ ELH ]
Tonic Maxi 12 Inch Guillotine Paper…
[ ELH ]
Teflon Bone Folder
[ ELH ]
Tonic Comfort 8.5 Inch Guillotine…
[ ELH ]
Scor-Pal Measuring & Scoring Board 12×12
[ ELH ]
Scor-Pal Glitter Clean-Up Cloth
[ ELH ]
Memory Box Dies, Metal Adaptor Plate
[ ELH ]
Sizzix Accessory – Standard Magnetic…
[ SZZ | SBC ]
Sizzix Accessory – Precision Base…
[ SZZ | SBC ]
Sizzix Big Shot White & Gray
[ ELH | SZZ | SBC ]
Dremel 7700-1/15 MultiPro 7.2-Volt…
[ AMZUS ]
 

Framed Flowers and Butterfly

I have another framed flowers and butterfly card to share with you today made using Rubbernecker 947-01B 2 Part Butterfly #2, 5144-04 Nested Square X Stitch, 5126D Tree Panel # 1, 5114D Mini Flower Stack, and 5131D Square Combo #1 OPC.  Instead of creating my usual clean and simple background I used a colorful paper from the My Mind’s Eye Hello Gorgeous pad.  I thought it was the perfect floral background for the butterfly to appear flitting around.Framed flowers and butterfly make such a pretty card front.

Assembling the Frame and Tree Panel

The square combo frame die and tree panel die were cut using green cardstock.  I applied double tick tape on the back of the smaller scalloped frame layer, attached the tree panel and cut off the excess.  The tree frame was attached to the X stitched layer with thin strips of mounting.  Another layer of mounting tape strips was attached to the back of the X stitched layer and it was attached to the larger scalloped frame.

Assembling the Card Base Layout

I cut a second square combo frame section and a strip of designer paper and then attached the scalloped border to the back of the strip using double stick tape.  I cut the strip in half and attached the sections at the top and bottom of the card using double stick tape.  The framed flowers layer was attached to the card base using thin strips of mounting tape.

Framed flowers and butterfly make such an elegant card front.

Assembling the Framed Flowers and Butterfly

I formed several tiny flowers using my stylus and molding pad and attached them to the tree branches inside the frame.  The two sections of butterfly were attached together with mounting tape and were attached to the frame using glossy accents.  I embellished the butterfly by attaching a few of the trimmed off tree panel branches and tiny flowers with glossy accents.  I finished by applying pre made cream Nuvo Crystal Drops to the flowers centers with glossy accents.

Framed flowers and butterfly make such an elegant and lovely card front.

I really like all the texture created by using the scalloped frame and X stitched layer together.  I think it adds interest to the project. Thank you for coming by today.  I hope you have enjoyed seeing my project and have been inspired to create your own framed flowers and butterfly project.

 
Nested Square X Stitch 5144-04D
[ RBB ]
Tree Panel #1 Die 5126D
[ RBB ]
Square Combo #1 OPC Die 5131D
[ RBB ]
2 Part Butterfly #2 947-01B
[ RBB ]
Mini Flower Stack Die 5114D
[ RBB ]
Kittie Kraft basics #1
[ RBB ]
My Minds Eye HG1013 Hello Gorgeous…
[ AMZUS ]
Bazzill Card Shoppe Cardstock, Easter…
[ ELH ]
Bazzill Card Shoppe Cardstock, Candy…
[ ELH ]
Neenah Cardstock, Neenah Classic…
[ ELH ]
Susan’s Garden 4pcs. all metal tool set
[ ELZ | ELH ]
Large Molding Pad (6.5″ X 12″/16.5mm…
[ ELZ ]
My Sweet Petunia MISTI Laser Etched…
[ ELH ]
My Sweet Petunia Mini MISTI Laser…
[ ELH ]
Tonic Nuvo Crystal Drops, Caramel Cream
[ ELH | SBC ]
Be Creative Tape, 7mm (3/10″)
[ ELH ]
Be Creative Tape, 15mm (3/5″)
[ ELH ]
Be Creative Tape, 25mm (1″)
[ ELH ]
Be Creative Tape, 5mm (1/4″)
[ ELH ]
Be Creative Tape, 3mm (1/8″)
[ ELH ]
EK Tools, Precision 5 Inch Scissors…
[ ELH ]
Ranger Non-Stick Craft Sheet
[ ELH ]
Glue Dots, 3/8″ (4029)
[ ELH ]
Glue Dots, Mini (3/16″)
[ ELH ]
Glue Dots, Micro (1/8″)
[ ELH ]
Scotch Foam Mounting Tape
[ ELH ]
ATG Double-Sided Refill Tape, 2 pk, 1/4″
[ ELH ]
ATG Kit, Advanced Tape Glider
[ ELH ]
Ranger Accents, Mini Glossy Accents
[ ELH ]
Ranger Accents, Glossy Accents
[ ELH ]
Creative Expressions Cosmic Shimmer…
[ ELH ]
Crafter’s Pick The Ultimate Glue, 4 oz.
[ ELH ]
PanPastel Sofft Mini Applicators, 12 pk
[ ELH ]
Hero Arts Embossing Gun (Wagner)
[ ELH ]
Tonic Maxi 12 Inch Guillotine Paper…
[ ELH ]
Teflon Bone Folder
[ ELH ]
Tonic Comfort 8.5 Inch Guillotine…
[ ELH ]
Scor-Pal Measuring & Scoring Board 12×12
[ ELH ]
Scor-Pal Glitter Clean-Up Cloth
[ ELH ]
Memory Box Dies, Metal Adaptor Plate
[ ELH ]
Sizzix Accessory – Standard Magnetic…
[ SZZ | SBC ]
Sizzix Accessory – Precision Base…
[ SZZ | SBC ]
Sizzix Big Shot White & Gray
[ ELH | SZZ | SBC ]
Dremel 7700-1/15 MultiPro 7.2-Volt…
[ AMZUS ]