Good Monday morning. My project today is a clean and simple poinsettia card made using the Rubbernecker Poinsettia #1 paired with the Berries, Greenery and Square Combo Frame. I really like the simplicity of the pink poinsettia and green foliage against the white framed background. Don’t laugh but I got this card totally put together and realized I had failed to put a Christmas sentiment in the lower portion of the frame before I attached it to the card base. Oh well…it’s still pretty. Maybe I can fit a die cut sentiment in the opening.
Assembling The Poinsettia
Cut the flower out once using pink cardstock and the largest flower section twice using pink cardstock.
Cut the tiny flowers out using yellow cardstock.
Use mini applicators to apply Spun Sugar and Worn Lipstick ink to all the flower petals to add depth of color.
Place the flower sections face down on the molding pad and form the petals using the large round stylus.
Place the flower sections face up on the molding pad and push down in the center using the small tipped stylus to push the petals up.
Begin assembling the flower by attaching the layers together using glossy accents. Off set the layers so no petals are lined directly over each other. I used two green layers on the bottom to create a full base.
Form the tiny flower centers using a small tipped stylus and molding pad and attach in the flower center using glossy accents.
The Berry Branches and Greenery
Cut the berry branches and greenery using green cardstock.
Cut the berries for the holly using pink cardstock.
Apply glossy accents to the berry bases and use the jewel picker to pick up the berries and attach.
Apply Worn Lipstick ink to the berries to add a depth of color.
Create the Arrangement
Apply glossy accents to the back of the poinsettia and attach it to the card base.
Tuck the berry branches under the flower petals and holly and attach with glossy accents.
Tuck the greenery sections under the flower petals and attach with glossy accents.
I hope you have been inspired to get out your poinsettia, berry branches and greenery dies to make a clean and simple poinsettia card of your own. I sure do appreciate you coming by and I hope you have a great day and a great week.
I assembled the windows, drapes and door and attached to the front of the house using glossy accents. I applied white embossing paste to the roof and chimney section with a Sofft spatula and sprinkled with clear glitter to add sparkle. I applied Cosmic Glitter Glue to the icicles and sprinkled with glitter. When dry the roof and icicles were attached together using double stick tape. I applied touches of embossing paste to the windows and applied glitter. The trees were crimped and then covered with paste and glitter. All the pieces were set aside to dry. I attached tiny springs of fir and red berries to the windows and applied touches of red glitter. I cut the tips off several fir sprigs and hand cut a tiny circle wreath base. I attached the tiny sprigs to the circle with glossy accents and then finished with red berries with red stickles and a handmade red bow made with thin strips of red cardstock. The wreath was attached to the front of the house with glossy accents.
I lined up the scalloped rectangle and matting basics rectangle on my big shot using my magnetic platform and cut the frame. I hand cut a ground snow piece using my deckle scissors and attached it to the back of the frame using double stick tape. I masked off the frame around the ground snow section to protect it and applied embossing paste and glitter. I applied thin strips of mounting tape to the back of the frame and attached it to the card base. I tucked the house in behind the ground piece and attached with mounting tape. I attached the trees on both sides of the house using mounting tape and glue dots. I finished by adding the cardinal to the sky area using glossy accents.
This was a time consuming card to make but oh what fun it was for me. I especially love the look of the snow covered crimped trees. Do you own a crimper and have it buried so far deep in your crafting space that don’t even remember you have one? I know it is considered an old-fashioned tool but I love how it adds dimension and interest.
Thanks for coming by and I hope you have a great Saturday.
Good Sunday morning. My project today was made for the November Challenge Chicks “Wrap it Up” challenge. The challenge is to make a tag that coordinates with some of your pretty wrapping paper. A new challenge will be posted every month and we would love for you to join us! No stress, no deadlines… just lots of fun! Please play along with us and link your projects on The Challenge Chicks CommunityFacebookpage. Use keyword CHXNOV15for your Splitcoaststampers gallery upload.
I purchased this large roll of wrapping paper from Costco years ago and it just keeps on keeping on. I used tons of it and it is still quite full. I love the sweet holiday images in the pattern and decided it would be fun to have my tag mimic the Christmas tree on the paper. I cut one of the three tags from the Impression Obsession Merry Christmas Tag Set in red and cut one from the set that was a little smaller in white. I cut the sentiment off the white one and attached it to the red using ATG adhesive. I attached a strip of gold foil paper along the bottom of the white edge to create a border for the tree. Sadly the gold doesn’t show well in the photo. I cut the Christmas Tree from the Christmas Icon set in green and layered it over top of a piece of red scrap paper. I cut a gold foil star from the Sun and Moon set and attached it to the top of the tree with glossy accents. I placed a small piece of mounting tape to the back of the tree and attached it to the tree.
I attached a bright red multi loop bow to the tag and attached it to the package. I usually put the “From and To” on the back of my tags so it doesn’t distract from the design.
I couldn’t resist showing some of the groupings of tags I have made during past holiday seasons. There really is no end to the fun you can have coming up with ideas to decorate your tags. Any thing goes- candy canes, gingerbread men, evergreen trees and deer, snowmen, window scenes, bells, candles, cardinals, pine. Let your imagination go wild! I’ll link some of the dies I used for these projects as well as the ones for todays project.
Please come join us and play along with The Challenge Chicks Circles challenge on Facebook and upload your card to your Splitcoaststampers gallery using the keyword CHXNOV15 . Your project will automatically be added to the challenge gallery. We look forward to seeing your projects!
Good Sunday morning. My project today was made for the October Challenge Chicks challenge to create a project using the 3-2-1 rules: 3 layers, 2 embellishments and 1 sentiment. And an extra twist for the challenge was to use pink. A new challenge will be posted every month and we would love for you to join us! No stress, no deadlines… just lots of fun! Please play along with us and link your projects on The Challenge Chicks CommunityFacebookpage. Use keyword CHXOCT15 for your Splitcoaststampers gallery upload.
OK. I have to admit that I may have gone a little overboard with my project. I consider the white card base as one layer and the green and pink as layers two and three. My wreath is one embellishment and my poinsettia and poinsettia petals are the second embellishment. That’s my story and I’m sticking to it! LOL! I hope I don’t go to Challenge Chick jail.
I created the wreath by cutting a circular base using two Spellbinders Classic Circles. I covered the wreath base with branches and attached with glossy accents. You can check out my step by step wreath tutorials here, here and here if you would like to see how I make my wreaths. I created one full poinsettia using the newly released Impression Obsession Small Poinsettia Set. I molded the petals with my stylus and molding pad, assembled and attached to the wreath. I applied glossy accents to the flower center and filled it with Sage Ultra Fine Flower Soft. I cut a few of the petal layers apart and inserted them around the main flower to fill in and add interest to the wreath.
I attached the crimped pink and green layers to the card base using ATG adhesive. The Merry Wishes sentiment was stamped with Peeled Paint distress ink. I applied glossy accents to the back of the wreath and attached to the card base. I used my paper piercer to go around and fluff up the branches to fill in for a natural look.
Thanks for coming by today and I hope you will enjoy going to see what our other Challenge Chicks have created.
Good Sunday morning. My project today was made for the September Challenge Chicks challenge to create a project using ink splatters. A new challenge will be posted every month and we would love for you to join us! No stress, no deadlines… just lots of fun! Please play along with us and link your projects on The Challenge Chicks CommunityFacebookpage. Use keyword CHXSEPT15 for your Splitcoaststampers gallery upload.
I love the Impression Obsession Elegant Pine Trio and thought it would be fun to create a simple snowy scene with them as the main focus. I started by applying plain water to a piece of Arches Hot Press Watercolor Paper. Unlike cold pressed paper hot pressed is very smooth and really nice for working with stamped images. I started by brushing my paper with plain water to prepare it to accept the blue ink for the sky. Next I put Tumbled Glass reinker into the lid of ink pad, mixed in a little water and then brushed it over the entire piece of watercolor paper. Since ink always dries much lighter than it looks when wet I used a concentrated mixture with lots more ink than water. I wanted the blue to be dark enough to allow my snow splatters to show well. I heat dried my paper and then stamped the image with Peeled Paint ink. Next I used a thin liner brush and Vintage Photo reinker to paint and fill in the tree trunks and branches. I used a plain damp brush to touch the pine sprigs to give a bit of a watercolor appearance and then used my Peeled Paint marker to fill in some of the pine sprigs to add back definition to areas that were washed a little too much. I went over all the branches with clear Wink of Stella but it doesn’t really show in the photos.
Next I added the spatters of falling snow to the scene. I placed the paper inside my cardboard splatter box, applied white gesso on to a wet toothbrush and flicked the brush bristles over the scene to splatter. I actually repeated this step a couple of times to create the heavy falling snow that I wanted. When the gesso was dry I layered and mounted it to my card base with mounting tape, I used all white cardstock to allow the scene to pop. I hand cut a piece of cardstock with my deckle scissors to create the snowy ground piece for the scene. I applied Crafter’s Pick Ultimate Glue with my finger and then applied Martha Stewart’s Crystal Fine Glitter. I attached three white birds in the scene to add interest and a bit of dimension to the stamped trees. I really love how this turned out. I know it is really simple but I think it looks so peaceful.
Thanks for coming by today. I hope you’ll come and play along in the Splatters challenge.
Good Sunday morning. I am excited to announce that I have been invited to be on The Challenge Chicks design team. A new challenge will be posted every month and we would love for you to join us! No stress, no deadlines… just lots of fun! Please play along with us and link your projects on The Challenge Chicks CommunityFacebookpage. Use keyword CHXAUG15for your Splitcoaststampers gallery upload..
I placed the white cardstock on my magnet platform and placed the Fancy Cut Border face down, lined it up on the edge of the paper and cut. I repeated these steps two more times to create the full page die cut background. I applied thin strips of mounting tape to the back of the background and attached to the card base. I cut the scalloped circle and then cut the frame opening. I cut a smaller frame to attach to the back for a double matted frame. I attached the scalloped frame to a piece of white cardstock with mounting tape and then attached the completed frame to the card base with ATG adhesive.
I cut the wreath once and cut the large and small flowers twice. The wreath was just a little too large to fit inside the framed circle so I cut it apart into several smaller sections. I attached a flower to the top portion of five of the cut stems and let them dry for a moment. Eliminating a few of the cut wreath sections allowed me to fit five of the flower and stem sections perfectly inside the frame. I applied glossy accents to the cut end of the first stem and attached to the inside frame base. The flower was left loose so I could lift it up to tuck the cut end of the next stem under it. I repeated this step four more times until all of the stem sections were attached. Then I went back and secured each loose flower head with glossy accents.
I applied a pearl in the center of each of the larger flowers and then added a few smaller flowers for the finishing touch.
Please come join us and play along with The Challenge Chicks Circles challenge on Facebook and upload your card to your Splitcoaststampers gallery using the keyword CHXAUG15 . Your project will automatically be added to the challenge gallery. We look forward to seeing your projects!
FTC Declaration – FTC16CFR, Part 255. In the spirit of full disclosure, I declare that I am a freelance designer. I currently receive or have received in the past products that I promote and endorse as a freelance designer for free or at a discount from the following companies: SCS, Rubbernecker, Stampavie, Whipper Snapper, My Favorite Things, Hanna Stamps. Any product that I sell and endorse is a product I have used in my designs and recommend with complete honesty. As a freelance designer, I have the freedom to promote/endorse products that I personally use and love. I have not nor will I knowingly endorse a product that I feel is of substandard quality.